Category
![]() |
COMPACT BALL VALVE
|
||||||||
---|---|---|---|---|---|---|---|---|---|
Design Advantages |
|||||||||
• Most economically low priced ball valve • Working pressure ratings similar to Safety Block style @ 150 p.s.i • Offered in socket, threaded and flanged end connections. •Handle position indicates open/close position
|
|||||||||
|
|||||||||
Materials Of Construction |
|||||||||
|
|||||||||
![]() |
|||||||||
VITON® is a trademark of DuPont Performance Elastomers TEFLON® is a trademark of DuPont Performance Elastomers
|
|||||||||
Ansi Dimensions |
|||||||||
![]() |
|||||||||
Testing performed on PVC/PP/EPDM valves at 73°F water temperature, non-shock.
TVI Compact Ball Valves (1/2" - 4") |
|||||||||
Design Specifications |
|||||||||
Thermoplastic ball valves 1/2" - 4" shall be compact type and have a one piece molded body with socket or threaded end connections. Seats shall be EPDM or Teflon®. Every valve is fully pressure and cycle tested to insure a quality molded in place finished product.Valves have a one piece self centering ball and stem design for leak tight operation. Materials of construction shall be as follows: (select as required for service) |
|||||||||
Body PVC, CPVC, ASTM D-1784
Ball & Stem PVC, CPVC, ASTM D-1784
Seats EPDM, Ethylene Propylene Diene Monomer
Seals EPDM, Ethylene propylene Diene Monomer
T Handle ABS D-1788
End connectors shall conform to the following standards:
Socket ASTM - D-2467 (PVC, SCH-80)ASTM - F-439 (CPVC, SCH-80)
Threaded ASTM - D-2464 (PCP, SCH-80)ASTM - F-439 (CPVC,SCH-80)
Not recommended for compressed air or gas service.
|
|||||||||